Мы используем файлы cookie.
Продолжая использовать сайт, вы даете свое согласие на работу с этими файлами.

Geyser

Подписчиков: 0, рейтинг: 0
Geyser
Strokkur geyser eruption, close-up view.jpg
Strokkur geyser, Iceland
Formed by Particular hydrogeological conditions that exist in a few places on Earth
A cross-section of a geyser in action

A geyser (/ˈɡzər/, UK: /ˈɡzə/) is a spring characterized by an intermittent discharge of water ejected turbulently and accompanied by steam. As a fairly rare phenomenon, the formation of geysers is due to particular hydrogeological conditions that exist only in a few places on Earth. Generally all geyser field sites are located near active volcanic areas, and the geyser effect is due to the proximity of magma. Generally, surface water works its way down to an average depth of around 2,000 metres (6,600 ft) where it contacts hot rocks. The resultant boiling of the pressurized water results in the geyser effect of hot water and steam spraying out of the geyser's surface vent (a hydrothermal explosion).

A geyser's eruptive activity may change or cease due to ongoing mineral deposition within the geyser plumbing, exchange of functions with nearby hot springs, earthquake influences, and human intervention. Like many other natural phenomena, geysers are not unique to Earth. Jet-like eruptions, often referred to as cryogeysers, have been observed on several of the moons of the outer solar system. Due to the low ambient pressures, these eruptions consist of vapor without liquid; they are made more easily visible by particles of dust and ice carried aloft by the gas. Water vapor jets have been observed near the south pole of Saturn's moon Enceladus, while nitrogen eruptions have been observed on Neptune's moon Triton. There are also signs of carbon dioxide eruptions from the southern polar ice cap of Mars. In the case of Enceladus, the plumes are believed to be driven by internal energy. In the cases of the venting on Mars and Triton, the activity may be a result of solar heating via a solid-state greenhouse effect. In all three cases, there is no evidence of the subsurface hydrological system which differentiates terrestrial geysers from other sorts of venting, such as fumaroles.

Etymology

The term 'geyser' in English dates back to the late 18th century and comes from Geysir, which is a geyser in Iceland. Its name means "one who gushes".

Form and function

Geysers are nonpermanent geological features. Geysers are generally associated with volcanic areas. As the water boils, the resulting pressure forces a superheated column of steam and water to the surface through the geyser's internal plumbing. The formation of geysers specifically requires the combination of three geologic conditions that are usually found in volcanic terrain: intense heat, water, and a plumbing system.

The heat needed for geyser formation comes from magma that needs to be close to the surface of the earth. In order for the heated water to form a geyser, a plumbing system (made of fractures, fissures, porous spaces, and sometimes cavities) is required. This includes a reservoir to hold the water while it is being heated. Geysers are generally aligned along faults.

Eruptions

Geyser exploding 1 large.jpgGeyser exploding 2 large.jpg
Geyser exploding 4 large.jpgGeyser exploding 3 large.jpg
Strokkur geyser erupting (clockwise from top left)
  1. Steam rises from heated water
  2. Pulses of water swell upward
  3. Surface is broken
  4. Ejected water spouts upward and falls back down into the pipe

Geyser activity, like all hot spring activity, is caused by surface water gradually seeping down through the ground until it meets rock heated by magma. In non-eruptive hot springs, the geothermally heated water then rises back toward the surface by convection through porous and fractured rocks, while in geysers, the water instead is explosively forced upwards by the high pressure created when water boils below. Geysers also differ from non-eruptive hot springs in their subterranean structure; many consist of a small vent at the surface connected to one or more narrow tubes that lead to underground reservoirs of water and pressure tight rock.

As the geyser fills, the water at the top of the column cools off, but because of the narrowness of the channel, convective cooling of the water in the reservoir is impossible. The cooler water above presses down on the hotter water beneath, not unlike the lid of a pressure cooker, allowing the water in the reservoir to become superheated, i.e. to remain liquid at temperatures well above the standard-pressure boiling point.

Ultimately, the temperatures near the bottom of the geyser rise to a point where boiling begins which forces steam bubbles to rise to the top of the column. As they burst through the geyser's vent, some water overflows or splashes out, reducing the weight of the column and thus the pressure on the water below. With this release of pressure, the superheated water flashes into steam, boiling violently throughout the column. The resulting froth of expanding steam and hot water then sprays out of the geyser vent.

A key requirement that enables a geyser to erupt is a material called geyserite found in rocks nearby the geyser. Geyserite—mostly silicon dioxide (SiO2), is dissolved from the rocks and gets deposited on the walls of the geyser's plumbing system and on the surface. The deposits make the channels carrying the water up to the surface pressure-tight. This allows the pressure to be carried all the way to the top and not be leaked out into the loose gravel or soil that are normally under the geyser fields.

Eventually the water remaining in the geyser cools back to below the boiling point and the eruption ends; heated groundwater begins seeping back into the reservoir, and the whole cycle begins again. The duration of eruptions and time between successive eruptions vary greatly from geyser to geyser; Strokkur in Iceland erupts for a few seconds every few minutes, while Grand Geyser in the United States erupts for up to 10 minutes every 8–12 hours.

General categorization

There are two types of geysers: fountain geysers which erupt from pools of water, typically in a series of intense, even violent, bursts; and cone geysers which erupt from cones or mounds of siliceous sinter (including geyserite), usually in steady jets that last anywhere from a few seconds to several minutes. Old Faithful, perhaps the best-known geyser at Yellowstone National Park, is an example of a cone geyser. Grand Geyser, the tallest predictable geyser on earth, (although Geysir in Iceland is taller, it is not predictable), also at Yellowstone National Park, is an example of a fountain geyser.

Geyser erupts up and blows sideways from a pool.
High geyser of water erupts out of the sparsely vegetated earth.
Fountain Geyser erupting from the pool (left) and Old Faithful geyser (cone geyser having mound of siliceous sinter) in Yellowstone National Park erupts approximately every 91 minutes (right).

There are many volcanic areas in the world that have hot springs, mud pots and fumaroles, but very few have erupting geysers. The main reason for their rarity is because multiple intense transient forces must occur simultaneously for a geyser to exist. For example, even when other necessary conditions exist, if the rock structure is loose, eruptions will erode the channels and rapidly destroy any nascent geysers.

As a result, most geysers form in places where there is volcanic rhyolite rock which dissolves in hot water and forms mineral deposits called siliceous sinter, or geyserite, along the inside of the plumbing systems which are very slender. Over time, these deposits strengthen the channel walls by cementing the rock together tightly, thus enabling the geyser to persist.

Geysers are fragile phenomena and if conditions change, they may go dormant or extinct. Many have been destroyed simply by people throwing debris into them while others have ceased to erupt due to dewatering by geothermal power plants. However, the Geysir in Iceland has had periods of activity and dormancy. During its long dormant periods, eruptions were sometimes artificially induced—often on special occasions—by the addition of surfactant soaps to the water.

Biology

Surreal blue pool surround by orange border on a purple ground.
Hyperthermophiles produce some of the bright colors of Grand Prismatic Spring, Yellowstone National Park

The specific colours of geysers derive from the fact that despite the apparently harsh conditions, life is often found in them (and also in other hot habitats) in the form of thermophilic prokaryotes. No known eukaryote can survive over 60 °C (140 °F).

In the 1960s, when the research of the biology of geysers first appeared, scientists were generally convinced that no life can survive above around 73 °C maximum (163 °F)—the upper limit for the survival of cyanobacteria, as the structure of key cellular proteins and deoxyribonucleic acid (DNA) would be destroyed. The optimal temperature for thermophilic bacteria was placed even lower, around 55 °C average (131 °F).

However, the observations proved that it is actually possible for life to exist at high temperatures and that some bacteria even prefer temperatures higher than the boiling point of water. Dozens of such bacteria are known.Thermophiles prefer temperatures from 50 to 70 °C (122 to 158 °F), whilst hyperthermophiles grow better at temperatures as high as 80 to 110 °C (176 to 230 °F). As they have heat-stable enzymes that retain their activity even at high temperatures, they have been used as a source of thermostable tools, that are important in medicine and biotechnology, for example in manufacturing antibiotics, plastics, detergents (by the use of heat-stable enzymes lipases, pullulanases and proteases), and fermentation products (for example ethanol is produced). Among these, the first discovered and the most important for biotechnology is Thermus aquaticus.

Major geyser fields and their distribution

Map showing that locations of geysers tend to cluster in specific areas of the world.
Distribution of major geysers in the world.

Geysers are quite rare, requiring a combination of water, heat, and fortuitous plumbing. The combination exists in few places on Earth.

Yellowstone National Park, U.S.

Yellowstone is the largest geyser locale, containing thousands of hot springs, and approximately 300 to 500 geysers. It is home to half of the world's total number of geysers in its nine geyser basins. It is located mostly in Wyoming, USA, with small portions in Montana and Idaho. Yellowstone includes the world's tallest active geyser (Steamboat Geyser in Norris Geyser Basin).

Valley of Geysers, Russia

The Valley of Geysers (Russian: Долина гейзеров) located in the Kamchatka Peninsula of Russia is the second largest concentration of geysers in the world. The area was discovered and explored by Tatyana Ustinova in 1941. Approximately 200 geysers exist in the area along with many hot-water springs and perpetual spouters. The area was formed due to a vigorous volcanic activity. The peculiar way of eruptions is an important feature of these geysers. Most of the geysers erupt at angles, and only very few have the geyser cones that exist at many other of the world's geyser fields. On June 3, 2007, a massive mudflow influenced two thirds of the valley. It was then reported that a thermal lake was forming above the valley. Few days later, waters were observed to have receded somewhat, exposing some of the submerged features. Velikan Geyser, one of the field's largest, was not buried in the slide and has recently been observed to be active.

El Tatio, Chile

A geyser bubbling at El Tatio geyser field

The name "El Tatio" comes from the Quechua word for oven. El Tatio is located in the high valleys on the Andes surrounded by many active volcanoes in Chile, South America at around 4,200 metres (13,800 ft) above mean sea level. The valley is home to approximately 80 geysers at present. It became the largest geyser field in the Southern Hemisphere after the destruction of many of the New Zealand geysers (see below), and is the third largest geyser field in the world. The salient feature of these geysers is that the height of their eruptions is very low, the tallest being only six metres (20 ft) high, but with steam columns that can be over 20 metres (66 ft) high. The average geyser eruption height at El Tatio is about 750 millimetres (30 in).

Taupō Volcanic Zone, New Zealand

The Taupō Volcanic Zone is located on New Zealand's North Island. It is 350 kilometres (217 mi) long by 50 km wide (31 mi) and lies over a subduction zone in the Earth's crust. Mount Ruapehu marks its southwestern end, while the submarine Whakatāne seamount (85 km or 53 mi beyond Whakaari / White Island) is considered its northeastern limit. Many geysers in this zone were destroyed due to geothermal developments and a hydroelectric reservoir, but several dozen geysers still exist. In the beginning of the 20th century, the largest geyser ever known, the Waimangu Geyser existed in this zone. It began erupting in 1900 and erupted periodically for four years until a landslide changed the local water table. Eruptions of Waimangu would typically reach 160 metres (520 ft) and some superbursts are known to have reached 500 metres (1,600 ft). Recent scientific work indicates that the Earth's crust below the zone may be as little as five kilometres (3.1 mi) thick. Beneath this lies a film of magma 50 kilometres (30 mi) wide and 160 kilometres (100 mi) long.

Iceland

Due to the high rate of volcanic activity in Iceland, it is home to some of the most famous geysers in the world. There are around 20–29 active geysers in the country as well as numerous formerly active geysers. Icelandic geysers are distributed in the zone stretching from south-west to north-east, along the boundary between the Eurasian Plate and the North American Plate. Most of the Icelandic geysers are comparatively short-lived, it is also characteristic that many geysers here are reactivated or newly created after earthquakes, becoming dormant or extinct after some years or some decades.

Two most prominent geysers of Iceland are located in Haukadalur. The Great Geysir, which first erupted in the 14th century, gave rise to the word geyser. By 1896, Geysir was almost dormant before an earthquake that year caused eruptions to begin again, occurring several times a day, but in 1916, eruptions all but ceased. Throughout much of the 20th century, eruptions did happen from time to time, usually following earthquakes. Some man-made improvements were made to the spring and eruptions were forced with soap on special occasions. Earthquakes in June 2000 subsequently reawakened the giant for a time but it is not currently erupting regularly. The nearby Strokkur geyser erupts every 5–8 minutes to a height of some 30 metres (98 ft).

Geysers are known to have existed in at least a dozen other areas on the island. Some former geysers have developed historical farms, which benefitted from the use of the hot water since medieval times.

Extinct and dormant geyser fields

There used to be two large geysers fields in NevadaBeowawe and Steamboat Springs—but they were destroyed by the installation of nearby geothermal power plants. At the plants, geothermal drilling reduced the available heat and lowered the local water table to the point that geyser activity could no longer be sustained.

Many of New Zealand's geysers have been destroyed by humans in the last century. Several New Zealand geysers have also become dormant or extinct by natural means. The main remaining field is Whakarewarewa at Rotorua. Two thirds of the geysers at Orakei Korako were flooded by the construction of the hydroelectric Ohakuri dam in 1961. The Wairakei field was lost to a geothermal power plant in 1958. The Taupō Spa field was lost when the Waikato River level was deliberately altered in the 1950s. The Rotomahana field was destroyed by the 1886 eruption of Mount Tarawera.

Misnamed geysers

There are various other types of geysers which are different in nature compared to the normal steam-driven geysers. These geysers differ not only in their style of eruption but also in the cause that makes them erupt.

Artificial geysers

In a number of places where there is geothermal activity, wells have been drilled and fitted with impermeable casements that allow them to erupt like geysers. The vents of such geysers are artificial, but are tapped into natural hydrothermal systems. These so-called artificial geysers, technically known as erupting geothermal wells, are not true geysers. Little Old Faithful Geyser, in Calistoga, California, is an example. The geyser erupts from the casing of a well drilled in the late 19th century. According to Dr. John Rinehart in his book A Guide to Geyser Gazing (1976 p. 49), a man had drilled into the geyser in search for water. He had "simply opened up a dead geyser".

In the case of the Big Mine Run Geyser in Ashland, Pennsylvania, the heat powering the geyser (which erupts from an abandoned mine vent) comes not from geothermal power, but from the long-simmering Centralia mine fire.

Perpetual spouter

This is a natural hot spring that spouts water constantly without stopping for recharge. Some of these are incorrectly called geysers, but because they are not periodic in nature they are not considered true geysers.

Commercialization

Bystanders watch a nearby geyser erupting.
The geyser Strokkur in Iceland – a tourist spot.

Geysers are used for various activities such as electricity generation, heating and tourism. Many geothermal reserves are found all around the world. The geyser fields in Iceland are some of the most commercially viable geyser locations in the world. Since the 1920s hot water directed from the geysers has been used to heat greenhouses and to grow food that otherwise could not have been cultivated in Iceland's inhospitable climate. Steam and hot water from the geysers has also been used for heating homes since 1943 in Iceland. In 1979 the U.S. Department of Energy (DOE) actively promoted development of geothermal energy in the "Geysers-Calistoga Known Geothermal Resource Area" (KGRA) near Calistoga, California through a variety of research programs and the Geothermal Loan Guarantee Program. The Department is obligated by law to assess the potential environmental impacts of geothermal development.

Cryogeysers

There are many bodies in the Solar System where jet-like eruptions, often termed cryogeysers (cryo meaning "icy cold"), have been observed or are believed to occur. Despite the name and unlike geysers on Earth, these represent eruptions of volatiles, together with entrained dust or ice particles, without liquid. There is no evidence that the physical processes involved are similar to geysers. These plumes could more closely resemble fumaroles.

  • Enceladus
Plumes of water vapour, together with ice particles and smaller amounts of other components (such as carbon dioxide, nitrogen, ammonia, hydrocarbons and silicates), have been observed erupting from vents associated with the "tiger stripes" in the south polar region of Saturn's moon Enceladus by the Cassini orbiter. The mechanism by which the plumes are generated remains uncertain, but they are believed to be powered at least in part by tidal heating resulting from orbital eccentricity due to a 2:1 mean-motion orbital resonance with the moon Dione.
  • Europa
In December 2013, the Hubble Space Telescope detected water vapor plumes above the south polar region of Europa, one of Jupiter's Galilean moons. It is thought that Europa's lineae might be venting this water vapor into space, caused by similar processes also occurring on Enceladus.
  • Mars
Similar solar-heating-driven jets of gaseous carbon dioxide are believed to erupt from the south polar cap of Mars each spring. Although these eruptions have not yet been directly observed, they leave evidence in the form of dark spots and lighter fans atop the dry ice, representing sand and dust carried aloft by the eruptions, and a spider-like pattern of grooves created below the ice by the out-rushing gas.
  • Triton
One of the great surprises of the Voyager 2 flyby of Neptune in 1989 was the discovery of eruptions on its moon Triton. Astronomers noticed dark plumes rising to some 8 km above the surface, and depositing material up to 150 km downwind. These plumes represent invisible jets of gaseous nitrogen, together with dust. All the geysers observed were located close to Triton's subsolar point, indicating that solar heating drives the eruptions. It is thought that the surface of Triton probably consists of a semi-transparent layer of frozen nitrogen overlying a darker substrate, which creates a kind of "solid greenhouse effect", heating and vaporizing nitrogen below the ice surface it until the pressure breaks the surface at the start of an eruption. Voyager's images of Triton's southern hemisphere show many streaks of dark material laid down by geyser activity.
Dark streaks deposited by geysers on Triton
Jets thought to be geysers erupting from Enceladus' subsurface
The Cold Geyser Model – a proposed explanation for cryovolcanism

See also

External links


Новое сообщение