Мы используем файлы cookie.
Продолжая использовать сайт, вы даете свое согласие на работу с этими файлами.
Protein splicing
Другие языки:

    Protein splicing

    Подписчиков: 0, рейтинг: 0
    mechanism of protein splicing involving inteins
    The mechanism of protein splicing involving inteins. In this scheme, the N-extein is shown in red, the intein in black, and the C-extein in blue. X represents either an oxygen or sulfur atom.

    Protein splicing is an intramolecular reaction of a particular protein in which an internal protein segment (called an intein) is removed from a precursor protein with a ligation of C-terminal and N-terminal external proteins (called exteins) on both sides. The splicing junction of the precursor protein is mainly a cysteine or a serine, which are amino acids containing a nucleophilic side chain. The protein splicing reactions which are known now do not require exogenous cofactors or energy sources such as adenosine triphosphate (ATP) or guanosine triphosphate (GTP). Normally, splicing is associated only with pre-mRNA splicing. This precursor protein contains three segments—an N-extein followed by the intein followed by a C-extein. After splicing has taken place, the resulting protein contains the N-extein linked to the C-extein; this splicing product is also termed an extein.

    History

    The first intein was discovered in 1988 through sequence comparison between the Neurospora crassa and carrotvacuolar ATPase (without intein) and the homologous gene in yeast (with intein) that was first described as a putative calcium ion transporter. In 1990 Hirata et al. demonstrated that the extra sequence in the yeast gene was transcribed into mRNA and removed itself from the host protein only after translation. Since then, inteins have been found in all three domains of life (eukaryotes, bacteria, and archaea) and in viruses.

    Protein splicing was unanticipated and its mechanisms were discovered by two groups (Anraku and Stevens) in 1990. They both discovered a Saccharomyces cerevisiae VMA1 in a precursor of a vacuolar H+-ATPase enzyme. The amino acid sequence of the N- and C-termini corresponded to 70% DNA sequence of that of a vacuolar H+-ATPase from other organisms, while the amino acid sequence of the central position corresponded to 30% of the total DNA sequence of the yeast HO nuclease.

    Many genes have unrelated intein-coding segments inserted at different positions. For these and other reasons, inteins (or more properly, the gene segments coding for inteins) are sometimes called selfish genetic elements, but it may be more accurate to call them parasitic. According to the gene centered view of evolution, most genes are "selfish" only insofar as to compete with other genes or alleles but usually they fulfill a function for the organisms, whereas "parasitic genetic elements", at least initially, do not make a positive contribution to the fitness of the organism.

    As of December 2019, the UniProtKB database contains 188 entries manually annotated as inteins, ranging from just tens of amino acid residues to thousands. The first intein was found encoded within the VMA gene of Saccharomyces cerevisiae. They were later found in fungi (ascomycetes, basidiomycetes, zygomycetes and chytrids) and in diverse proteins as well. A protein distantly related to known inteins containing protein, but closely related to metazoan hedgehog proteins, has been described to have the intein sequence from Glomeromycota. Many of the newly described inteins contain homing endonucleases and some of these are apparently active. The abundance of intein in fungi indicates lateral transfer of intein-containing genes. While in eubacteria and archaea, there are 289 and 182 currently known inteins. Not surprisingly, most intein in eubacteria and archaea are found to be inserted into nucleic acid metabolic protein, like fungi.

    Inteins vary greatly, but many of the same intein-containing proteins are found in a number of species. For example, pre-mRNA processing factor 8 (Prp8) protein, instrumental in the spliceosome, has seven different intein insertion sites across eukaryotic species. Intein-containing Prp8 is most commonly found in fungi, but is also seen in Amoebozoa, Chlorophyta, Capsaspora, and Choanoflagellida. Many mycobacteria contain inteins within DnaB (bacterial replicative helicase), RecA (bacterial DNA recombinase), and SufB (FeS cluster assembly protein). There is remarkable variety within the structure and number of DnaB inteins, both within the mycobacterium genus and beyond. Interestingly, intein-containing DnaB is also found in the chloroplasts of algae. Intein-containing proteins found in archaea include RadA (RecA homolog), RFC, PolB, RNR. Many of the same intein-containing proteins (or their homologs) are found in two or even all three domains of life. Inteins are also seen in the proteomes encoded by bacteriophages and eukaryotic viruses. Viruses may have been involved as vectors of intein distribution across the wide variety of intein containing organisms.

    Mechanism

    The process begins with an N-O or N-S shift when the side chain of the first residue (a serine, threonine, or cysteine) of the intein portion of the precursor proteinnucleophilically attacks the peptide bond of the residue immediately upstream (that is, the final residue of the N-extein) to form a linear ester (or thioester) intermediate. A transesterification occurs when the side chain of the first residue of the C-extein attacks the newly formed (thio)ester to free the N-terminal end of the intein. This forms a branched intermediate in which the N-extein and C-extein are attached, albeit not through a peptide bond. The last residue of the intein is always an asparagine, and the amide nitrogen atom of this side chain cleaves apart the peptide bond between the intein and the C-extein, resulting in a free intein segment with a terminal cyclic imide. Finally, the free amino group of the C-extein now attacks the (thio)ester linking the N- and C-exteins together. An O-N or S-N shift produces a peptide bond and the functional, ligated protein.

    The mechanism for the splicing effect is a naturally occurring analogy to the technique for chemically generating medium-sized proteins called native chemical ligation.

    Intein

    An intein is a segment of a protein that is able to excise itself and join the remaining portions (the exteins) with a peptide bond during protein splicing. Inteins have also been called protein introns, by analogy with (RNA) introns.

    Intein splicing occurs post-translationally in a self-catalytic process. Here, the extein is shown in red and the intein in blue. Image created with Biorender.com.

    Naming conventions

    The first part of an intein name is based on the scientific name of the organism in which it is found, and the second part is based on the name of the corresponding gene or extein. For example, the intein found in Thermoplasma acidophilum and associated with Vacuolar ATPase subunit A (VMA) is called "Tac VMA".

    Normally, as in this example, just three letters suffice to specify the organism, but there are variations. For example, additional letters may be added to indicate a strain. If more than one intein is encoded in the corresponding gene, the inteins are given a numerical suffix starting from 5′ to 3′ or in order of their identification (for example, "Msm dnaB-1").

    The segment of the gene that encodes the intein is usually given the same name as the intein, but to avoid confusion the name of the intein proper is usually capitalized (e.g., Pfu RIR1-1), whereas the name of the corresponding gene segment is italicized (e.g., Pfu rir1-1).

    Types of inteins

    The type of the splicing proteins is categorized into four classes: maxi-intein, mini-intein, trans-splicing intein, and alanine intein. Maxi-inteins are N- and C-terminal splicing domains containing an endonuclease domain. The mini-inteins are typical N- and C-terminal splicing domains; however, the endonuclease domain is not present. In trans-splicing inteins, the intein is split into two (or perhaps more) domains, which are then divided into N-termini and C-termini. Alanine inteins have the splicing junction of an alanine instead of a cysteine or a serine, in both of which the protein splicing occurs.

    Full and mini inteins

    Inteins can contain a homing endonuclease gene (HEG) domain in addition to the splicing domains. This domain is responsible for the spread of the intein by cleaving DNA at an intein-free allele on the homologous chromosome, triggering the DNA double-stranded break repair (DSBR) system, which then repairs the break, thus copying the intein-coding DNA into a previously intein-free site. The HEG domain is not necessary for intein splicing, and so it can be lost, forming a minimal, or mini, intein. Several studies have demonstrated the modular nature of inteins by adding or removing HEG domains and determining the activity of the new construct.

    Split inteins

    Sometimes, the intein of the precursor protein comes from two genes. In this case, the intein is said to be a split intein. For example, in cyanobacteria, DnaE, the catalytic subunit α of DNA polymerase III, is encoded by two separate genes, dnaE-n and dnaE-c. The dnaE-n product consists of an N-extein sequence followed by a 123-AA intein sequence, whereas the dnaE-c product consists of a 36-AA intein sequence followed by a C-extein sequence.

    Applications in biotechnology

    Inteins are very efficient at protein splicing, and they have accordingly found an important role in biotechnology. There are more than 200 inteins identified to date; sizes range from 100–800 AAs. Inteins have been engineered for particular applications such as protein semisynthesis and the selective labeling of protein segments, which is useful for NMR studies of large proteins.

    Pharmaceutical inhibition of intein excision may be a useful tool for drug development; the protein that contains the intein will not carry out its normal function if the intein does not excise, since its structure will be disrupted.

    It has been suggested that inteins could prove useful for achieving allotopic expression of certain highly hydrophobic proteins normally encoded by the mitochondrial genome, for example in gene therapy. The hydrophobicity of these proteins is an obstacle to their import into mitochondria. Therefore, the insertion of a non-hydrophobic intein may allow this import to proceed. Excision of the intein after import would then restore the protein to wild-type.

    Affinity tags have been widely used to purify recombinant proteins, as they allow the accumulation of recombinant protein with little impurities. However, the affinity tag must be removed by proteases in the final purification step. The extra proteolysis step raises the problems of protease specificity in removing affinity tags from recombinant protein, and the removal of the digestion product. This problem can be avoided by fusing an affinity tag to self-cleavable inteins in a controlled environment. The first generation of expression vectors of this kind used modified Saccharomyces cerevisiae VMA (Sce VMA) intein. Chong et al. used a chitin binding domain (CBD) from Bacillus circulans as an affinity tag, and fused this tag with a modified Sce VMA intein. The modified intein undergoes a self-cleavage reaction at its N-terminal peptide linkage with 1,4-dithiothreitol (DTT), β-mercaptoethanol (β-ME), or cystine at low temperatures over a broad pH range. After expressing the recombinant protein, the cell homogenate is passed through the column containing chitin. This allows the CBD of the chimeric protein to bind to the column. Furthermore, when the temperature is lowered and the molecules described above pass through the column, the chimeric protein undergoes self-splicing and only the target protein is eluted. This novel technique eliminates the need for a proteolysis step, and modified Sce VMA stays in column attached to chitin through CBD.

    Recently inteins have been used to purify proteins based on self aggregating peptides. Elastin-like polypeptides (ELPs) are a useful tool in biotechnology. Fused with target protein, they tend to form aggregates inside the cells. This eliminates the chromatographic step needed in protein purification. The ELP tags have been used in the fusion protein of intein, so that the aggregates can be isolated without chromatography (by centrifugation) and then intein and tag can be cleaved in controlled manner to release the target protein into solution. This protein isolation can be done using continuous media flow, yielding high amounts of protein, making this process more economically efficient than conventional methods. Another group of researchers used smaller self aggregating tags to isolate target protein. Small amphipathic peptides 18A and ELK16 (figure 5) were used to form self cleaving aggregating protein.

    Applications in Antimicrobial Development

    Over the last twenty years, there has been increasing interest in leveraging inteins for antimicrobial applications. Intein splicing is found exclusively in unicellular organisms, with a particularly high abundance in pathogenic microorganisms. Furthermore, inteins are commonly found within housekeeping proteins and/or proteins involved in the survival of the organism within a human host. Post-translational intein removal is necessary for the protein to properly fold and function. For example, Gaëlle Huet et al. demonstrated that in Mycobacterium tuberculosis, unspliced SufB prevents the formation of the SufBCD complex, a component of the SUF machinery. As such, the inhibition of intein splicing may serve as a powerful platform for the development of antimicrobials.

    Current research on intein splicing inhibitors has focused on developing antimycobacterials (M. tb. has three intein-containing proteins), as well as agents active against pathogenic fungi Cryptococcus and Aspergillus. Cisplatin and similar platinum-containing compounds inhibit splicing of the M. tb. RecA intein through coordinating to catalytic residues. Divalent cations, such as copper (II) and zinc (II) ions, function similarly to reversibly inhibit splicing. However, neither of these methods are currently suitable for an effective and safe antibiotic. The fungal Prp8 intein is also inhibited by divalent cations and cisplatin through interfering with the catalytic Cys1 residue. In 2021, Li et al. showed that small molecule inhibitors of Prp8 intein splicing were selective and effective at slowing the growth of C. neoformans and C. gattii, providing exciting evidence for the antimicrobial potential of intein splicing inhibitors.

    See also

    Further reading

    External links


    Новое сообщение